7
Specifications
The following specifications are based on your R3X Isolation Base part number
which is marked on the outside of the original factory box. The part number is
composed of the following information sequence:
Series - Model Number – Foot Type (Load Range) - Base Color
The load range can also be identified by the color of the sticker located on the
back of the isolation base frame. Just cross reference the color of the sticker to the
table on the next page that corresponds to your base’s model number. The
isolators are also marked with colored dots that should match the colored sticker
on the back of the frame. Bases with custom load ranges have no colored sticker,
but their isolators are marked.
The recommended load range is the range of component weight that will yield
optimal performance. If you have less than recommended load you will still likely
obtain very good results based on HRS technology. Placing more than 10% over
the maximum recommended load may result in a significant decrease in isolation
base performance because there is a safety stop mechanism that will engage to
prevent damage to the isolation base. When the safety mechanism is engaged the
performance is decreased significantly until the isolation base is returned to
within its rated load range.