ii
FOR SAFE OPERATION
The operators of the tool and the maintenance personnel who are in charge of maintenance and repair work
are required to read the following
SAFETY INSTRUCTIONS
.
Fully understand and follow the descriptions given in this Instruction Manual and the warning symbols at-
tached to the tool.
( I ) Description of warning messages
* Determine the degree of impairment referring to the below-stated classification.
Major injury
: Indicates the loss of eyesight, wounds, burns (hyperthermal and hypothermal
burns), electric shocks, fracture of a bone, poisoning, etc. requiring emergency of
extended medical care.
Injury (Minor injury) : Indicates wounds, burns, electric shocks, etc. requiring medical treatment.
Damage to property : Indicates damage to the machinery and or the surrounding area.
DANGER :
Used in the case where it is assumed that misuse of the machine will expose the operator
to immediate danger of major injury or death.
WARNING :
Used in the case where it is assumed that misuse of the machine can expose the
operator to danger of major injury or death.
CAUTION :
Used in the case where it is assumed that misuse of the machine can expose the
operator to danger of injury and can cause damage to property.
Basic safety instructions
1. Be sure to read this Instruction Manual and all the instructions and other materials supplied with the unit
as accessories. Save this Instruction Manual and make it available for review whenever necessary.
Safety device and warning labels
1. Such safety devices as the safety cover and the like are not attached to this tool. When performing con-
nection, use this tool while fully considering so that the fingers or the like are not caught in the handle
section.
Application
1. This tool shall only be used for its originally intended purpose while following the instructions specified
in this Instruction Manual. Hirose assumes no responsibility for any misuse of the tool other than the
intended use.
2. Modifications to this tool is prohibited. We assume no responsibility for accidents resulting from modifi
-
cations.
Maintenance
1. To prevent possible accidents caused by unfamiliarity with the operation of the tool, repair and adjust-
ment of the tool shall be conducted only by maintenance personnel who have a full knowledge of the
tool. Any repair and adjustment beyond the range covered by the instructions given in this Instruction
Manual is prohibited. We assume no responsibility for accidents caused by improper repair or adjust-
ment or the use of non-genuine part(s).
2. To protect against personal injury, check to be sure that screws and nuts are properly tightened after the
completion of repair/adjustment works or replacement of the parts.
3. Periodically cleaning of the tool is recommended.
4. In the event that your tool fails to perform normally after repair or adjusting immediately stop the work
and contact us for service so as to protect against personal injury.
SAFETY INSTRUCTIONS
CAUTION
Aug.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
