HRS DF63 Series Manual Download Page 4

Page: 4 / 6

HIROSE ELECTRIC CO.,LTD.

ETAD-H0892-00

4 /6

FORM HC0011-9-2

△

3-2. Socket removal

3-2-a. Removal:

：

Remove the socket while pressing with a finger the lock spring on the socket to unlock.

To avoid degraded quality, do not tilt the socket for removal as shown
in the figure below.

Fig.5 Socket removal

Direction of removal

Lock spring

Fig6. Forbidden removal

Summary of Contents for DF63 Series

Page 3: ...1 c Check fitting Make sure the socket has been firmly fit with the header or In line plug Check that the socket lock has been caught at the header lock or In line plug lock by slightly pulling a cable by hand To remove the socket refer to 3 2 Socket removal Fig 4 Prohibited insertion May 1 2020 Copyright 2020 HIROSE ELECTRIC CO LTD All Rights Reserved ...

Page 4: ...ket while pressing with a finger the lock spring on the socket to unlock To avoid degraded quality do not tilt the socket for removal as shown in the figure below Fig 5 Socket removal Direction of removal Lock spring Fig6 Forbidden removal May 1 2020 Copyright 2020 HIROSE ELECTRIC CO LTD All Rights Reserved ...

Page 6: ... force applied to connectors could cause fault or damage Therefore avoid forced insertion or removal impacts given by falling or forced pulling of cables Avoid insert socket by bundling the cable or applying stress to the socket like below picture shown Fig8 Forbidden insertion May 1 2020 Copyright 2020 HIROSE ELECTRIC CO LTD All Rights Reserved ...