HIROSE ELECTRIC CO.,LTD.
ETAD-H0892-00
0
3 /6
FORM HC0011-9-2
△
To avoid degraded quality, do not tilt the socket for insertion as shown in the
figure below.
3-1-c. Check fitting:
Make sure the socket has been firmly fit with the header or In-line plug.
(Check that the socket lock has been caught at the header lock or In-line plug lock
by slightly pulling a cable by hand.)
To remove the socket, refer to 3-2. Socket removal.
Fig.4 Prohibited insertion
May.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.