HRS DF57 Series, Manual

Page: 6 / 8

6
DF57 Series
●
Low Profile “Swing-Lock” Board to Wire Connector for Power
■
Crimp contact
%#,
&#+
%#)*
%#+.
%#-+
'#*
&
(#&
(
%#.(*
E2)
(#.*
¢&
i2%#&'
[Packaging Specifi cation]
Blank : Embossed tape packaging (40,000 pcs/reel)
(41) : Embossed tape packaging (35,000 pcs/reel)
●
Applicable wire (Tin plated annealed copper wire)
●
Strip length 1.0 to 1.4mm
B
Tools
Type Part No. HRS No. Applicable contact
Applicator
AP105-DF57-2628S 901-4622-2
DF57-2628SCF(41)
DF57-2628SCFA(41)
AP105-DF57-2830S 901-4618-5 DF57-2830SCF
AP105-DF57-2830SA 901-4645-0 DF57-2830SCFA
AP105-DF57-3234S 901-4629-1 DF57-3234SCF
Press CM-105C 901-0001-0 -----------
Hand crimping tool HT305/DF57-2830HC(Note 2) 902-4635-0 DF57-2830SCF
Contact extraction tool DF-C-PO(B) 550-0179-2 DF57-****SCF(A)
Note 1 : If any trouble has occurred due to tools other than the designated tool, Hirose bears no respoisibility for any trouble.
Note 2 : The compatible wire is limited to UL1571 of thin wire type, 28 to 30 AWG.
Part No. HRS No. Packaging Quantity Finish Applicable wire Applicable socket connector
DF57-2628SCF(41) 666-0013-3 41 Reel 35,000 Tin plated
26 to 28 AWG DF57AH-*S-1.2C(**)
DF57-2628SCFA(41) 666-0033-0 41 Reel 35,000 Gold plated
DF57-2830SCF 666-0001-4 Reel 40,000 Tin plated
28 to 30 AWG
DF57H-*S-1.2C(**)
DF57AH-*S-1.2C(**)
DF57-2830SCFA 666-0034-3 Reel 40,000 Gold plated
DF57-3234SCF 666-0016-1 Reel 40,000 Tin plated
32 to 34 AWG
DF57-3234SCFA Under planning Reel 40,000 Gold plated
Note : Embossed tape reel packaging (40,000 pcs/reel).
Order by number of reels.
Part No.
Wire size
(Stranded wire conductor)
Jacket outer diameter Recommended cable
DF57-2628SCF(41)
DF57-2628SCFA
26 AWG （ 7/Ø0.16mm ）
Ø0.88mm max.
UL3302 ， UL3610
28 AWG （ 7/Ø0.127mm ） -----------
DF57-2830SCF
DF57-2830SCFA
28 AWG
（
7/Ø0.127mm
）
Ø0.5mm ‒ Ø0.63mm
UL1571(Thin wire)
，
UL10584(ETFE wire)
30 AWG
（
7/Ø0.102mm
）
DF57-3234SCF
32 AWG （ 7/Ø0.08mm ）
Ø0.32mm
‒
Ø0.42mm -----------
34 AWG （ 7/Ø0.08mm ）
Note 1 : When using other than the recommended wire, contact your nearest Hirose sales representative.
Note 2 : The strip length is a reference value. Please make adjustments so fi nished crimps will meet the specifi ed values.
Refer to the crimping quality standards (ATAD-H0404) for details.
Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.