18
© 2018
– HRMTEC – www.hrmtec.com
v1.6e
If the print temperature is set too hot, the printing foil tends to tear.
The correct setting of the printing temperature and speed are essential for optimum
printing results.
The above settings are
basic values
which
should be changed individually and
in single steps
in order to obtain an optimal print result.
Note: Black on moiré ribbon is difficult to emboss, and depends very much on the
ribbon used (manufacturer, surface) and room temperature. It is possible that
satisfactory print quality cannot be achieved. In such a case, one should change to
another band material.
Changed parameters are saved for further embossing.
