PROGRAMMING
PREPARATION: Before programming your call blocker, you will need the following:
1) A telephone handset connected on the PHONE socket of the Call Blocker.
2) You also need to be able to hear dialtone through the connected handset. You will need to use your handset’s
dialpad to program your call blocker.
1)
Setting date and time (optional)
Important: The month, day and time is constantly updated automatically as provided by the caller id data of
incoming calls. Follow the instructions below to manually update this information.
When in standby mode (e.g. when showing the month, day, and time (hour & minutes) in the upper center of the
display), please press and hold the left side of the
〖
UP/SET
〗
button for 3 seconds, the LCD screen should display:
Date Set, then press the
〖
ACCEPT/WHITE LIST
〗
button, the month should be flashing in the LCD, then use the
〖
UP/SET
〗
and
〖
DOWN
〗
button (left of right side) to adjust the digits up and down, then press the
〖
ACCEPT/WHITE LIST
〗
button to confirm and adjust the day, then the hour and the minutes.
2)
Setting the voice (optional)
When in standby mode, please press the
〖
VOICE/A/B/C/OFF
〗
button, then we could switch the voice function,
you could see the
〖
A/B/C/OFF
〗
in the top right corner.
All for four choice: A. English B. Spanish C. German D. OFF (default set)
Important: When you turn this feature ON (A, B, C), new callers (e.g. phone numbers that have not been registered)
will not be able to ring your phone. Only numbers that have been registered in the Whitelist (ACCEPTED) will ring.
All other calls will be disconnected. Voice recording will play 3 times and then the calls will be disconnected.
3)
Browsing Incoming Call Numbers
When in standby mode, please press the
〖
DOWN
〗
button (right side) to browse the incoming phone records. The
LCD screen will display incoming call numbers, the date and time of each call, NEW calls or not. Press the
〖
UP/SET
〗
and
〖
DOWN
〗
buttons to review recent incoming call records.
4)
Deleting Incoming Numbers
While browsing the incoming call list, press
〖
DELETE/HOME
〗
button two times within 1 second to delete that
number, or press and hold the
〖
DELETE/HOME
〗
button for 3 seconds to delete all incoming call numbers.
Exit Incoming Numbers Browsing Mode: Press the
〖
DELETE/HOME
〗
button once within 1 second to exit the
browsing mode.
5)
Browse Outgoing Numbers
When in standby mode, press the
〖
UP/SET
〗
button (left side) to browse the outgoing phone number records. The
LCD screen will display outgoing call numbers and each call duration. Press the
〖
UP/SET
〗
and
〖
DOWN
〗
button
(right & left sides) to review recent outgoing call records (up and down the list).
6)
Deleting outgoing numbers
While browsing the Outgoing numbers (as shown above), press the
〖
DELETE/HOME
〗
button two times within 1
second to delete that group number, or press and hold
〖
DELETE/HOME
〗
button for 3 seconds to delete all
outgoing call numbers.
Exit Outgoing call browsing mode: While browsing the Outgoing numbers (as shown above), press the
〖
DELETE/HOME
〗
button one time within 1 second to get out of the setting.
7)
Browse White List Numbers
