- 14 -
- 15 -
Setting Battery Mode
LCD Screen Display Cycle
Pre start-up display cycle when the MPPT controller turns on, this usually last
several seconds while controller detects operating environment.
Charging PV Voltage
Charging Amperage
Charging
Watt-hour
Controller
Temperature
Load Mode
Load Watt-hour
Load Amperage
Battery Voltage
Battery Capacity
(Only for reference)
Error Code
Default Page
The battery voltage view will be displayed by default. Use the up and down
arrow keys to cycle through different views. The battery voltage view will
resume upon 30 seconds of inactivity. The error code view will be displayed
when an error is detected. The backlight in the screen will be on for 20
seconds with any button operation.
Abbreviations
Battery Types
Description
FLD
SEL
GEL
LI
USE
Flooded Battery
Sealed/AGM Battery
Gel Battery
Lithium Battery
Advanced User Mode
Auto-recognition with default
parameters set for each type of
batteries.
Low temperature protection (
Frozen charge forbid). Some
parameters can be customized.
Most parameters can be
customized.
LCD DISPLAY RULES & CYCLES
Enter SET mode by pressing the Setting key in any view page other than
Load Mode Or Controller Temperature. Use the up and down arrow keys to
select battery mode, then long press Setting key to save.
