HQ Power VDSSM4, User Manual

Page: 2 / 22

VDSSM4
00 (28/07/2008) HQPOWER
2
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling. This
device should be returned to your distributor or to a local recycling service. Respect the
local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing the HQ-Power
VDSSM4
! Please read the manual thoroughly before bringing
this device into service. If the device was damaged in transit, do not install or use it and contact your
dealer. Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
2.
Safety Instructions
Keep the device away from children and unauthorised
users.
Indoor use only.
Keep this device away from rain, moisture, splashing and
dripping liquids. Never put objects filled with liquid on top of
or close to the device
.
Be very careful during the installation: touching live wires
can cause life-threatening electroshocks.
Do not touch the device during operation as the housing
heats up.
Protection Class 1 device. Connect only to grounded
outlet.
Risk of electric shock
.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Note that damage caused by user modifications to the device is not covered by the warranty.
3.
General Guidelines
•
Do not use the device when damage to housing or cables is noticed.
•
Do not attempt to service the device yourself but contact an authorised dealer.
•
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Avoid damage to the device by letting it stabilise to room temperature before switching it on.
•
Protected the device against extreme heat, dust and moisture.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons.
•
Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if
necessary.
•
Make sure that the available voltage does not exceed the voltage stated in the specifications of
this manual.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•
The VDSSM4 should only be used indoors with an alternating current of max. 230VAC / 50Hz.