PROMIX200_v2
VELLEMAN
4
4. Device Layout
a. Top Panel
1. PH1/LN1 selector
2. Channel 1 volume control
3. Channel 1 fader
4. Talkover on/off switch
5. Microphone volume control
6. 6.35mm microphone input
7. Master VU meter
8. VU meter colour selector
9. PH2/LN2 selector
10. Channel 2 volume control
11. Channel 2 fader
12. Channel 1 / 2 cue selector
13. Headphones volume control
14. 6.35mm headphones output
15. Channel 1 / 2 crossfader
16. Master output level control
b. Rear Panel
17. Power Switch
18. Voltage selector 115/230V
19. Power cord
20. Fuse holder
21. MASTER stereo RCA output
22. REC stereo RCA output
23. LINE2 stereo RCA input
24. PHONO2 stereo RCA input
25. LINE1 stereo RCA input
26. PHONO1 stereo RCA input
27. Ground Connector
5. Connections
•
Make sure the power switch (#17) is set to “OFF” before making any connections.
•
Use only high quality audio cables to minimize sound quality losses.
•
Connect your amplifier to the MAIN output (#21) and any recording device to the REC output (#22)
•
Connect your microphone to the MIC input (#6) and your headphones to the PHONES output (#14).
•
Connect record players to the PHONO inputs (#24 & 26) and line signals to the LINE inputs (#23 & 25).
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts and the installation location should not be deformed, modified or tampered with.
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts.
7. Contact your dealer for spare parts if necessary.
Summary of Contents for PROMIX200
Page 2: ......
