VDPLDJBAR8
V. 01
–
25/11/2014
9
©Velleman nv
2
dimmer
000
255
RGB brightness from 0-100 %
3
strobe/chase
speed
000
015
no strobe
016
255
strobe speed
4
R brightness
000
255
1
st
red LED from 0-100 %
5
G brightness
000
255
1
st
green LED from 0-100 %
6
B brightness
000
255
1
st
blue LED from 0-100 %
7
R brightness
000
255
2
nd
red LED from 0-100 %
8
G brightness
000
255
2
nd
green LED from 0-100 %
9
B brightness
000
255
2
nd
blue LED from 0-100 %
10
R brightness
000
255
3
rd
red LED from 0-100 %
11
G brightness
000
255
3
rd
green LED from 0-100 %
12
B brightness
000
255
3
rd
blue LED from 0-100 %
13
R brightness
000
255
4
th
red LED from 0-100 %
14
G brightness
000
255
4
th
green LED from 0-100 %
15
B brightness
000
255
4
th
blue LED from 0-100 %
8.7
Ob-3 Mode
To select the ob-3 mode:
1.
Press MENU until <Ob-3> is displayed.
2.
Press ENTER to confirm.
The ob-3 mode allows you to use the
VDPLDJBAR8
as a basic 3-channel RGB device. Individual control
of the parCANs and the built-in programmes are not available.
9.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
Clean the external optics with a soft cloth.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).
Do not immerse the device in any liquid.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free
glass cleaner, or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cloth or a lens cleaning tissue.
Softly drag any dirt or grime to the outside of the external optics or glass/transparent surface.
Gently polish until free of haze and lint.
Dry carefully after cleaning.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change
the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
There are no user-serviceable parts, apart from the fuse.
Refer to an authorized dealer for service and/or spare parts.
