TP808 User Manual
25
2) Wi-Fi Settings
●
Connection method:
In AP mode, the factory default IP address is 192.168.1.1
Open the browser to enter the default IP: 192.168.1.1 into the settings interface, the web
interface login password is 12345678.
Refer to WIFI Operation Manual.pdf for more details.
Note: the computer must be connected to the WiFi card to enter the page Setup.
● Printing the WIFI information:
1
）
Short press the power button for 3 times, then the printer starts printing the WIFI parameters
information.
2
）
Short press the power button for 5 times, then the printer will restore WIFI parameters
information (Restore to AP mode). The printer automatically restarts and the boot time is 2~3
seconds.
Status
LED
Power on-Be ready
Fast flash
Fail to be ready
Fast flash
After exiting configuration mode, the
printing indicates that the WIFI
configuration failed and the LED is
constant light.
No device connected
Constant light
Equipment connected or connected successfully means
it is in working status
Slowly flash
Device disconnect or device connection unsuccessful
Constant light
