HPRT PPTII-A, Programming Manual

Page: 42 / 52

PPTII-A Programming Manual
www.hprt.com 42
ESC o x x’ y y’ r r’
[Name] Circle
[Format] ASCII ESC m x x’ y y’ r r’
Hex 1b 6f xL xH yL yH rL rH
Decimal 27 111 xL xH yL yH rL rH
[Range] 0≤xH≤1
0≤yH≤1
0≤rH≤1
[Dscription]
xL
、
xH Denote the low and high bytes on X coordinate of Origin point .
yh
、
yH Denote the low and high bytes on Y coordinate of Origin point .
rL
、
rH Denote the low and high bytes of Radius
[Default] The function just come true by page mode
When circle, please pay attention about the size of the canvas page mode.Circle can’t
be drew if the size pass over canvas.
GS x n
[Name] Set serial port 2 baud rate
[Format] ASCII GS x n
Hex 1D 78 n
Decimal 29 120 n
[Dscription]
n Baud rate
0 9600
1 19200
2 38400
3 57600
4 115200
[Default] The modified value will be saved .The baud rate is still that you revised at next time
open the printer.
GS i n
[Name] Adjusting AD
[Format] ASCII GS i n
Hex 1d 69 n
Decimal 29 105 n
[Range]
n=0
、
1
[Dscription] n=0 Adjusting the value of AD line
n=1 Recover the default value of AD line
[Default] The modified value will be saved .The baud rate is still that you revised at next time
open the printer