3. Pull the end of the roll straight toward you. Then press down on both sides
of the printer cover to close it firmly.
5. Use the tear bar to cut the extra paper.
Menu Se�ngs
1. Press and hold [MODE] bu�on for approx. 2 seconds, and printer is turned
on. LCD display is shown as follows.
2. Press both [MODE] bu�on and [FEED] bu�on, the main menu is displayed
on the screen, followed by:
Density: Light/Regular/Dark
Paper: Receipt/Label
Feed with closed cover: On/Off
Standby: Se�ng range n-60, which can be normally set and saved
Shutdown: Se�ng range n-360, which can be normally set and saved
Self-test Page --- Label Learning --- Quit the Menu
◆
Before changing the menu se�ng, please make sure that the communica�on
with a host device is disconnected.
◆
When the printer is under the Bluetooth communica�on with a host device,
it cannot enter the Menu Se�ng mode.
Ba�ery Charging
Plug in socket with USB charging. When ba�ery pack runs out of power, the
ba�ery icon will flash. It powers off automa�cally when con�nues prin�ng.
If you want to go on, please charge it.
Charging via AC Adapter
Charging via PC
3. Press
[
MODE] bu�on to change the op�on.
4. Press [FEED] bu�on to change the category of sub-op�on; long press
[FEED] bu�on to confirm the current se�ng.
4. When you close the printer cover, make sure that it is closed on both sides.
Bluetooth Name
：
HM-A300-xxxx
Bluetooth Code
：
1234
Label
HM-A300-2342
Note:
Trouble Shoo�ng
Reset
Bluetooth Se�ng
[MODE] Bu�on
[FEED] Bu�on
Trouble Shoo�ng
Reset Bu�on
Q: When the printer crashes, how to deal with it?
A: Open the top cover, press the reset bu�on by the needle or toothpick,
the printer will be off, and then turn it on again.
