HPE StoreOnce 6500 User Manual Download

Page: 52 / 258

The user or group will be highlighted.

Click

Delete

A confirmation window opens.

Click

The user or group is deleted from the list.

Leaving the AD domain

You may want to leave an AD domain in order to:

• Temporarily leave, then rejoin the same domain.

• Join a different AD domain.

• Put the StoreOnce System into either No Authentication or Local User Authentication mode.

Procedure

Navigate to

NAS—CIFS Server

Click

Leave AD

You can then rejoin the same domain. If joining a different AD domain or changing modes, click the

Edit

button on the page and select the new domain or mode.

NFS shares

To use the NAS NFS shares, there are two configuration stages when creating a backup target share that
UNIX and Linux servers can access:

• Configure NFS server hosts that can mount the NFS shares using the NFS server tab. See

Configuring NFS server hosts

on page 53.

• Create NAS NFS shares on the StoreOnce System:

◦ Using the StoreOnce Management GUI: See

Creating NAS shares

◦ Using the StoreOnce CLI: See the

StoreOnce System CLI Reference Guide

You can also use the NFS server tab to enable or disable NFS Browsability; see

Enabling and disabling

NFS Browsability

on page 52.

Enabling and disabling NFS Browsability

Enabling NFS Browsability allows all NFS clients to view all of the NFS shares. Disabling it prevents NFS
clients from viewing the NFS shares.

The NFS Browsability setting applies to all nodes in the cluster.

Leaving the AD domain

Summary of Contents for StoreOnce 6500



































































































































































































































































Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands

HPE StoreOnce 6500, User Manual

Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands