The Shell also provides CLI-based commands you can use to obtain system information, and to configure and
update the system BIOS.
Prerequisites
Embedded UEFI Shell
is set to enabled.
Procedure
1.
From the
System Utilities
screen, select
Embedded Applications
>
Embedded UEFI Shell
.
The
Embedded UEFI Shell
screen appears.
2.
Press any key to acknowledge that you are physically present.
This step ensures that certain features, such as disabling
Secure Boot
or managing the
Secure Boot
certificates using third-party UEFI tools, are not restricted.
3.
If an administrator password is set, enter it at the prompt and press
Enter
.
The
Shell>
prompt appears.
4.
Enter the commands required to complete your task.
5.
Enter the
exit
command to exit the Shell.
Intelligent Provisioning
Intelligent Provisioning is a single-server deployment tool embedded in ProLiant servers and HPE Synergy
compute modules. Intelligent Provisioning simplifies server setup, providing a reliable and consistent way to
deploy servers.
Intelligent Provisioning prepares the system for installing original, licensed vendor media and Hewlett Packard
Enterprise-branded versions of OS software. Intelligent Provisioning also prepares the system to integrate
optimized server support software from the Service Pack for ProLiant (SPP). SPP is a comprehensive
systems software and firmware solution for ProLiant servers, server blades, their enclosures, and HPE
Synergy compute modules. These components are preloaded with a basic set of firmware and OS
components that are installed along with Intelligent Provisioning.
IMPORTANT:
HPE ProLiant XL servers do not support operating system installation with Intelligent
Provisioning, but they do support the maintenance features. For more information, see "Performing
Maintenance" in the
Intelligent Provisioning User Guide
and online help.
After the server is running, you can update the firmware to install additional components. You can also update
any components that have been outdated since the server was manufactured.
To access Intelligent Provisioning:
• Press
F10
from the POST screen.
• From the iLO web interface using
Always On
.
Always On
allows you to access Intelligent Provisioning
without rebooting your server.
Intelligent Provisioning operation
Intelligent Provisioning includes the following components:
• Critical boot drivers
• Active Health System (AHS)
54
Diagnostic tools
Summary of Contents for ProLiant XL230k Gen10
