HPE ProLiant ML10 Gen9, Maintenance And Service Manual

Page: 29 / 76

Removal and replacement procedures 29
5.
Remove the drive cage from the chassis.
6.
Remove the drive from the drive cage.
To replace the component, reverse the removal procedure.
Drive 6 in the drive enablement option
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 24 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Remove the access panel (on page 24 ).