HPE Aruba AP-MNT-W4, Installation Manual

Page: 3 / 3

AP-MNT-W4 Mount Kit
| Installation Guide
3
Installing Cables with a Coupler
For APs with straight-entry Ethernet ports, an Ethernet cable with an angled plug can be used, or an adapter
cable and coupler are provided. APs with side-entry Ethernet ports can use this mount kit without use of an
angled plug or adapter cable and coupler. Use the following step to insert the RJ45 cable into the RJ45 coupler.
1. Insert one end of the cable into the coupler until the cable snaps into place. See
Figure 5 .
Figure 5 Inserting the RJ45 Cable into the RJ45 Coupler
Figure 6 shows an example of an access point with a straight-entry port using the cable and coupler.
Figure 6 AP-345 with Cable and Coupler
Figure 7 shows an access point with a side-entry port with a cable directly attached.
Figure 7 AP-303 with Cable