Rack mounting
1.
Install mounting brackets (included) for use in a two-post rack. You can orient the brackets
to be either flush with the switch front or offset from the switch front, as illustrated below.
NOTE:
If the JL312A Power Adapter Shelf is installed, then position the mounting brackets
over the center set of screw holes on each side of the switch instead of the forward set on
each side.
1
2
1
1
2
2
2.
Secure the mounting brackets to a two-post rack. The illustration to the right shows the
recommended positioning of the mounting brackets when the optional JL312A Power Adapter
Shelf is used with the switch.
Tabletop or desktop mounting
•
Attach the four self-adhesive pads (included) to the bottom corners of the switch and place
the switch on a secure tabletop or desktop surface.
Mounting the JL258A Aruba2930F 8–port switch
9
