Specifications
Environmental specifications
Specification
Value
System inlet temperature (standard operating
support
—
Operating
10°C to 35°C (50°F to 95°F)
Nonoperating
-30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing)
—
Operating
8% to 90%
28°C (82.4°F), maximum wet bulb temperature
Nonoperating
5% to 95%
38.7°C (101.7°F), maximum wet bulb temperature
All temperature ratings shown are for sea level. An altitude derating of 1.0°C per 305 m (1.8°F per 1,000 ft) to 3,050 m
(10,000 ft) is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The upper
limit and rate of change might be limited by the type and number of options installed. Under standard operating support, a
fan fault or the ambient temperature exceeding 30°C (86°F) might result in reduced system performance issue.
Mechanical specifications
Specification
Value
Dimensions
—
Height
8.73 cm (3.44 in)
Depth, chassis with 1U server node
85.95 cm (33.84 in)
Depth, chassis with 2U server node
89.38 cm (35.19 in)
Width
44.81 cm (17.64 in)
—
Weight, minimum
17.21 kg (37.94 lb)
Weight, maximum for 1U system
22.65 kg (49.94 lb)
Weight, maximum for 2U system
19.62 kg (43.25 lb)
The weight values are for a chassis with server nodes and server blanks installed.
54
Specifications
Summary of Contents for Apollo z70
Page 18: ...18 Customer self repair ...
Page 19: ...Customer self repair 19 ...
Page 20: ...20 Customer self repair ...
Page 51: ...Drive power cabling Fan cabling Fan signal cabling Cabling 51 ...
