HPE Apollo sx40, Maintenance And Service Manual

Page: 41 / 76


P05957-002 Part replacement procedures 4-9
10. Secure the control panel with three screws.
11. Connect the cable to the control panel.
12. Install the fan next the control panel.
13. Install the foam block over the control panel.
14. Install the front top cover.
15. Connect the system to site power.
16. Power up the system.
4.4.3 Disk drive replacement (external drive)
To replace an external disk drive:
1. Open the drive latch.
2. Slide the drive out of the chassis.
3. Remove the drive from the drive carrier.
4. Install the new drive in the drive carrier.
5. Slide the drive carrier into the chassis.
6. Close the drive latch to secure the drive.