30
After the IRF fabric is recovered, all ports that have been shut down by MAD come up automatically.
Displaying and maintaining an IRF fabric
Execute
display
commands in any view.
Task
Command
Display information about all IRF
members.
display irf
Display the IRF fabric topology.
display irf topology
Display IRF link information.
display irf link
Display IRF configuration.
display irf configuration
Display the load sharing mode for
IRF links.
display irf-port load-sharing mode
[
irf-port
[
member-id
/
port-number
] ]
Display MAD configuration.
display mad
[
verbose
]
Configuration examples
This section provides IRF configuration examples for IRF fabrics that use different MAD
mechanisms.
LACP MAD-enabled IRF configuration example (using
crosslink ports)
Network requirements
, set up a two-member IRF fabric. Configure LACP MAD on the multi-member
aggregation to Device E, an HPE device that supports extended LACP.
Figure 16 Network diagram
XGE1/0/17-XGE1/0/20
(IRF-port1/1)
(IRF-port2/2)
XGE2/0/17-XGE2/0/20
FGE1/1/1
FGE2/1/1
Device A
Device B
FGE1/0/1
IRF
Device E
FGE1/0/2
