HPE 5900 series Command Reference Manual Download Page 8

Page: 8 / 34

S-Channel1/0/1:1

EVB mode : Local-bridge/Remote-station

BGID status : Supported

Local RR capability : Supported

Local RR status : Disabled

Remote SGID status : Not supported

Remote RR request status : Not requested

Remote RR status : Unknown

Max ECP retry time : Local-3/Remote-NA/Operative-3

ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16

Resource wait-delay exponent : Local-20/Remote-NA/Operative-20

Reinit Keep-alive exponent : Local-25/Remote-NA/Operative-25

S-Channel1/0/1:100

EVB mode : Local-bridge/Remote-station

BGID status : Supported

Local RR capability : Supported

Local RR status : Disabled

Remote SGID status : Not supported

Remote RR request status : Not requested

Remote RR status : Unknown

Max ECP retry time : Local-3/Remote-NA/Operative-3

ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16

Resource wait-delay exponent : Local-20/Remote-NA/Operative-20

Reinit keep-alive exponent : Local-25/Remote-NA/Operative-25

Table 2 Command output

Field Description

EVB mode

EVB mode:

•

bridge

—EVB bridge.

•

station

—EVB station.

BGID status

Support for Group ID on the EVB bridge:

•

Supported.

•

Not

supported.

Local RR capability

Support for the RR mode on the EVB bridge:

•

Supported.

•

Not

supported.

Local RR status

RR status on the EVB bridge after EVB TLV negotiation.

Remote SGID status

Support for Group ID on the EVB station:

•

Supported.

•

Not

supported.

Remote RR request status

Whether or not the EVB station has requested the RR mode:

•

Requested.

•

Not

requested.

Summary of Contents for 5900 series



































Search results

Summary of Contents for 5900 series

Reviews:

Related manuals for 5900 series

Brands by name

Popular brands

HPE 5900 series, Command Reference Manual

Search results

Summary of Contents for 5900 series

Reviews:

Related manuals for 5900 series

Brands by name

Popular brands