HPE 5900 series Command Reference Manual Download Page 13

Page: 13 / 34

interface-number

channel-id

: Specifies an S-channel interface or S-channel aggregate interface.

The

interface-number

argument specifies the interface where the S-channel resides. The

channel-id

argument specifies the ID of the S-channel.

interface-number

channel-id

vsi-local-id

: Specifies a VSI interface or VSI aggregate interface. The

interface-number

argument specifies the interface where the S-channel resides. The

channel-id

argument specifies the ID of the S-channel. The

vsi-local-id

argument specifies the local ID of the

VSI.

brief

: Displays brief information. If you do not specify this keyword, the command displays detailed

information.

down

: Displays information about interfaces in DOWN state and the causes. If you do not specify

this keyword, the command displays information about interfaces in all states.

description

: Displays a complete interface description in brief information when you configure an

interface description string longer than 27 characters. If you do not specify this keyword, the
command displays only the first 27 characters in brief information.

Usage guidelines

If you do not specify the

s-channel

keyword, the command displays information about all interfaces.

If you specify the

s-channel

keyword but do not specify an S-channel interface or VSI interface, the

command displays information about all created S-channel interfaces and VSI interfaces.

Examples

# Display detailed information about S-Channel 1/0/1:10.

<Sysname> display interface s-channel 1/0/1:10

S-Channel1/0/1:10

Current state: UP

IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e

Description: S-Channel1/0/1:10 Interface

Bandwidth: 1000000kbps

Unknown-speed mode, unknown-duplex mode

Link speed type is autonegotiation, link duplex type is autonegotiation

PVID: 1

Port link-type: trunk

VLAN Passing: 1(default vlan), 2

VLAN permitted: 1(default vlan), 2

Trunk port encapsulation: IEEE 802.1q

Last clearing of counters: Never

Input (total): 6 packets, 384 bytes

Output (total): 18 packets, 1152 bytes

# Display brief information about S-Channel 1/0/1:10.

<Sysname> display interface s-channel 1/0/1:10 brief

Brief information on interface(s) under bridge mode:

Link: ADM - administratively down; Stby - standby

Speed or Duplex: (a)/A - auto; H - half; F - full

Type: A - access; T - trunk; H - hybrid

Interface Link Speed Duplex Type PVID Description

SCH1/0/1:10 UP 10G(a) F(a) T 1

# Display detailed information about S-Channel 1/0/1:10.1.

<Sysname> display interface s-channel 1/0/1:10.1

S-Channel1/0/1:10.1

Summary of Contents for 5900 series



































Search results

Summary of Contents for 5900 series

Reviews:

Related manuals for 5900 series

Brands by name

Popular brands

HPE 5900 series, Command Reference Manual

Search results

Summary of Contents for 5900 series

Reviews:

Related manuals for 5900 series

Brands by name

Popular brands