background image

8/8/2014                                                        800 

Index: 

1)

 

General Information 

2)

 

Selecting the Location 

3)

 

Construction of Enclosure 

4)

 

Installation of Fire Pit 

5)

 

Media 

Product Specific Information  

6)

 

Parts List 

7)

 

Assembly 

8)

 

Fire Pit Operation 

9)

 

Maintenance 

10)

 

Troubleshooting 

11)

 

Warranty 

 

1)

 

General Information 

 

Instructions are also available at HPCfire.com 

 

Please carefully follow the instructions in this manual to prevent personal injury or property loss.  Instructions are 
updated as needed.  It is the installer’s responsibility to periodically review instruction for applicable updates. 

 

The steps listed as: 

 

WARNINGS:

  Contains information critical to the safe installation and operation of the fire-pit. 

WARRANTY REQUIREMENT: 

Must be strictly followed to qualify for product warranty

.  

Warranty will be void if not followed. 

IMPORTANT: 

Are notes and insights to help ensure product satisfaction and serviceability. 

-------------------------------------------------------------------------------------------------------------------------------------------------              

WARNING:

 

 

It is the installer’s responsibility to ensure a safe installation and to educate the end user as to proper 

operation.  Leave this manual with the end user. 

WARNING:

 

 Never

 

alter product or configuration in any way. 

WARNING:

 

FOR REMOTE CONTROL USE: 

This family of product is not for use with any type of remote or 

start-up timer control.

  

WARNING:

 

We suggest that our products be installed by professionals that are locally licensed by the authority having  

jurisdiction in gas piping.  We suggest that our products be serviced annually by a professional certified in the US by the  
National Fireplace Institute (NFI) as NFI Gas Specialists or in Canada by WETT (Wood Energy Technical Training).   
Installer must follow all instructions carefully to ensure proper performance and safety.  Hearth Products Controls  
Company is not responsible for your actions.   

WARNING

:

  Product is not intended to be a starter for wood or any other combustibles.  

WARNING:

  

It is the responsibility of the installer to follow:    

o

 

The 

National Fuel Gas Code

ANSI Z223.1/NFPA 54

 or 

International Fuel Gas Code. 

o

 

The 

National Electrical Code, ANSI/NFPA 70

o

 

Local Codes 

WARNING:

  

Only use gas/fuel type specified for this fire pit see label on the fire pit control Box.  Verify correct 

gas/fuel type and pressure.  Never use an alternative fuel to include bio-fuel, ethanol, lighter fluid or any other fuel. 
 

             Gas pressure and type should be checked prior to use and installation. 

             

 

                

 Natural Gas Fire Pit:  

Supply Pressure: Minimum: 3.5” W.C.; Maximum: 7.0” W.C.   
 

 

                

 LP Gas: 

Supply Pressure: Minimum: 8.0” W.C.; Maximum: 11.0” W.C.   
 
 
 
 

Summary of Contents for Match Lit











Reviews: