manualshive.com logo in svg

HP ZHAN 66 Pro 14 G3, Maintenance And Service Manual

Share
Download
HP ZHAN 66 Pro 14 G3 Maintenance And Service Manual Download Page 37

Bottom cover

Table 5-1

  Bottom cover description and part number

Description

Spare part number

Bottom cover for use in models with UMA graphics

L44558-001

Bottom cover for use in models with discrete graphics

L64085-001

Before removing the bottom cover, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 28

).

2.

Place the computer in Battery Safe mode (

Battery Safe mode on page 28

).

Remove the bottom cover:

1.

Loosen the five captive Phillips screws (1).

2.

Remove the two Phillips M2.0 × 5.0 screws (2) that secure the bottom cover to the computer.

3.

Starting under the display, use a nonconductive, nonmarking tool to pry the cover up (3), and then 
remove the cover from the computer (4).

Reverse these procedures to install the bottom cover.

Component replacement procedures

29

Summary of Contents for ZHAN 66 Pro 14 G3



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands