EL-MF877-00 Page 3
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
29 Use
PH1
screwdriver to loose the screws and remove the iron
30 Use
PH1
screwdriver to loose the screws and remove the iron
31 Disconnect fan cable from MB
32. Remove the fans
33. Disconnect cables from convert board
34. Use
PH1
screwdriver to loose the screws and remove the iron
35. Press the button and remove the cable
36. Disconnect all cables from MB
37. Use
PH1
screwdriver to loose the screws of MB from board
38. Remove MB from chassis
39. Remove the battery from the system board
40. Use
PH1
screwdriver to loose the screws and remove the led flatiron
41. Rotate the handle and open it up and remove WLAN M.2 Card
42. Press the botton
43. Remove the HDD
44 Press the convert board latch
45 Remove convert board from the cage
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
Step1
Open access panel
Step2
Remove the cage from host up
Step3
Use
PH1
screwdriver to loose the screws and remove
the heatsink
Step4
Rotate the handle and open it up
