manualshive.com logo in svg

HP ZBook 14, Service Manual, Page: 28 / 175

Share
Download
HP ZBook 14 Service Manual Download Page 28

Front

Component

Description

(1)

Wireless light 

●

White: An integrated wireless device, such as a
wireless local area network (WLAN) device and/
or a Bluetooth® device, is on.

●

Amber: All wireless devices are off.

(2)

Power light 

●

On: The computer is on.

●

Blinking: The computer is in the Sleep state
(Windows) or Suspend state (Linux).

●

Off: The computer is off or in Hibernation (Linux).

(3)

AC adapter/Battery light

●

White: The computer is connected to external
power and the battery is charged from 90 to 99
percent.

●

Amber: The computer is connected to external
power and the battery is charged from 0 to 90
percent.

●

Blinking amber: A battery that is the only
available power source has reached a low battery
level. When the battery reaches a critical battery
level, the battery light begins blinking rapidly.

●

Off: The battery is fully charged.

(4)

Hard drive light

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily
parked the hard drive.

16

Chapter 2   External component identification

Summary of Contents for ZBook 14
















































































































































































Reviews:

No comments