HP Xw460c - ProLiant - Blade Workstation, Installation Manual

Page: 27 / 33

Description Possible value Value Parameter
Only the Administrator can set
the privilege level.
•
Administrator—Can perform
all actions on the enclosure
•
Operator—Can perform all
actions on the enclosure
except administering users
and certificates
•
User (read-only)
•
Can view all information
•
Can launch web
interfaces to other
devices
•
Cannot change any
configuration settings
Administrator, Operator, or User Privilege level
A list of the Onboard
Administrator bays, server bays,
and interconnect bays that can
be managed by the user — User permissions
Server and interconnect EBIPA configuration parameters
Enclosure Bay IP Addressing (EBIPA) enables you to assign static IP addresses to server bays, interconnect
bays (or both) in the enclosure. These IP addresses are used by the server blade Integrated Lights Out (iLO)
ports when inserted into a bay. In addition, an interconnect module (switch) management port, if available,
uses the preassigned IP address when inserted into the interconnect bay.
Omit this step if your network has an external DHCP service or if you want to manually assign static IP
addresses individually to the server blades and interconnect modules.
Record the configuration parameters in the following tables.
Table 4-5 Shared device settings for device bays table
Description Possible value Value Parameter
The subnet mask for the server
bays ###.###.###.###, where ###
ranges from 0 to 255 Subnet mask
The gateway address for the
server bays ###.###.###.###, where ###
ranges from 0 to 255 Gateway
The domain name for the server
bays A character string that includes
alphanumeric characters and
the dash Domain
The IP address for the primary
DNS server ###.###.###.###, where ###
ranges from 0 to 255 DNS server 1
The IP address for the secondary
DNS server ###.###.###.###, where ###
ranges from 0 to 255 DNS server 2
The IP address for the tertiary
DNS server ###.###.###.###, where ###
ranges from 0 to 255 DNS server 3
The IP address of the primary
server that synchronizes time
and date using the NTP protocol ###.###.###.###, where ###
ranges from 0 to 255 NTP server 1
The IP address of the secondary
server that synchronizes time
and date using the NTP protocol ###.###.###.###, where ###
ranges from 0 to 255 NTP server 2
Server and interconnect EBIPA configuration parameters 27