Reference Guide
55
System Management
To set up email for notifications
The projector can send email messages to specified recipients when certain critical
events occur.
1. On a networked computer, open an internet browser, enter the IP address of the
projector into the URL bar, and press
Enter.
See “To find the IP address” on
page 53 for more information.
2. Click the
Management
tab, and on the left side of the screen, click
Alerts.
3. Select one or more of the events that cause email alerts.
4. Enter the email addresses to receive the alerts.
5. Enter the IP address of the Simple Mail Transfer Protocol (SMTP) server used by
the projector for outgoing email. The SMTP server relays messages to recipients.
6. Click
Apply.
To protect configuration changes
1. On a networked computer, open an internet browser, enter the IP address of the
projector into the URL bar, and press
Enter.
See “To find the IP address” on
page 53 for more information.
2. Click the
Networking
tab,
and on the left side of the screen, click
Admin.
Account.
3. Enter and confirm a password.
You must use this password for all access and configuration parameter changes.
To disable the password, delete the password and leave the field blank.
4. Click
Apply.
Summary of Contents for xp8000 - Digital Projector
