Connecting to a room controller
51
TNT
–45 to 45, +, –, ? Sets or queries the tint.
RADJ
–50 to 50, +, –, ? Sets or queries the amount of red.
GADJ
–50 to 50, +, –, ? Sets or queries the amount of green.
BADJ
–50 to 50, +, –, ? Sets or queries the amount of blue.
CTMP
0 to 2, ?
Sets or queries the color temperature: 0=warm, 1=neutral,
2=cool.
SHRP
0 to 12, +, –, ?
Sets or queries the sharpness.
PENH
0 to 6, +, –, ?
Sets or queries the picture enhancement setting.
KEYV
–50 to 50, +, –, ? Sets or queries the vertical keystone: 0=no keystone
adjustment, 1 to 50=shrinks the top of the display,
–1 to -50=shrinks the bottom of the display.
ASPT
0, 1, 4, ?
Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit,
4=Reduced.
SYNC
None
Automatically resynchronizes the projector to the active
computer input source.
FREQ
–50 to 50, +, –, ? Sets or queries the projector’s timing relative to the active
computer input source.
TRK
value
, +, –, ?
Sets or queries the synchronization of the projector to the
active computer input source.
VPOS
value
, +, –, ?
Sets or queries the vertical positioning of the projected
image: usable range is the maximum and minimum allowed
by the active computer input source.
HPOS
value
, +, –, ?
Sets or queries the horizontal positioning of the projected
image: usable range is the maximum and minimum allowed
by the active computer input source.
HIDE
0, 1, ?
Sets or queries picture blanking: 0=not hidden, 1=hidden.
WIDE
0, 1, ?
Sets or queries wide screen mode: 0=normal, 1=wide.
KEYR
None
Resets keystone to zero.
Video functions (continued)
Command
Parameters
Description
