Adjusting the Projector
30
You can also customize the picture modes so they are best for your video sources:
1.
Press the picture mode
button to select the picture mode you want to adjust.
2.
Press
enter
and go to
Picture > Customize picture mode
.
3.
Adjust the settings until you are satisfied with the picture.
TIP:
To exit from any on-screen menu or adjustment, press the exit
button.
To return to the most recently used menu item when no on-screen menu or adjustment is
displayed, press the exit button.
Adjusting the shape of the picture
Depending on the type of video source you are viewing, the picture might or might not always
look correct or fit on the screen:
•
If the active video device sends widescreen output to the projector, press
enter
, go to
Source
, and set
Widescreen input
to
On
. See
1
in the following diagram.
•
If the video device sends standard output, set
Widescreen input
to
Off
.
TIP:
If you show widescreen pictures on a wide projection screen, a standard picture might
not fit on the screen. One solution is to change the current picture mode so it makes a smaller
picture. Press
enter
, go to
Picture > Customize picture mode
, and set
Aspect Ratio
to
Reduced
.
See
2
in the following diagram.
