manualshive.com logo in svg

HP XM600 - Kayak - 128 MB RAM, Technical Reference Manual, Page: 41 / 145

Share
Download
HP XM600 - Kayak - 128 MB RAM Technical Reference Manual Download Page 41

 41

2   System Board

Chipset

Chipset

The Intel

®

 820 chipset supports RDRAM memory technology and system 

bus speeds up to 133 MHz, while delivering significant graphics 
performance enhancements through its AGP 4x graphics interface. It is 
comprised of the following:

• The 82820 Memory Controller Hub (MCH) provides the CPU interface, 

DRAM interface, and AGP interface in the 820 chipset platform. The MCH 
supports up to two processors. The table on 

page 43

 details the MCH chip 

features.

•

The 82801 I/O Controller Hub (ICH) utilizes Intel® Accelerated Hub 
Architecture to make a direct connection from the graphics and memory 
to the integrated AC97 controller, the ATA66 controller, dual USB ports, 
and PCI add-in cards. The table on 

page 49

 details the ICH chip features.

• The 82802 Firmware Hub (FWH) stores system BIOS and video BIOS, as 

well as the Intel

®

 Random Number Generator (RNG). The Intel RNG pro-

vides truly random numbers to enable stronger encryption, digital signing, 
and security protocols. The table on 

page 62

 details the FWH features.

MCH

ICH

FWH

Summary of Contents for XM600 - Kayak - 128 MB RAM


















































































































































Reviews:

No comments