POGO (10-pin) docking connector cable
Description
Spare part number
POGO (10-pin) docking connector cable for products not equipped with a hard drive
833623-001
POGO (10-pin) docking connector cable for products equipped with a hard drive
833624-001
Before releasing the POGO-pin (10-pin) docking connector cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 26
), and then remove the following components:
a.
Battery (see
Battery on page 28
)
b.
Audio jack board (see
Audio board on page 30
)
c.
Speakers (see
Speakers on page 31
)
d.
Touch board (see
Touch board on page 33
)
e.
System board (see
System board on page 34
)
f.
Wireless antenna (see
Wireless antenna on page 37
)
g.
Power/volume button board (see
Power/volume button board on page 38
)
h.
Webcam module (see
Webcam module on page 40
)
i.
Middle frame (see
Middle frame on page 42
)
Remove the POGO (10-pin) docking connector board:
1.
Release the ZIF connector (1) that secures the POGO (10-pin) docking connector board to the display
panel assembly.
POGO (10-pin) docking connector cable
43
