18
The Print Server Configuration Page lists the following information about your print
server:
Mac Address
— your print server's
unique hardware number, the MAC
(Media Access Control) address.
FLASH-ROM
— the firmware version and
date
BOOT-ROM
— device boot code version
TCP/IP
— the IP address and associated
settings
AppleTalk Settings
— a list of current
AppleTalk settings
SNMP
— shows whether SNMP
community names (passwords) have
been “Set”
Wireless Settings
— WLAN settings in
accordance with the IEEE 802.11b
standard
Current Status
— information about the
attached printer and connectivity. Link
Status shows the state of the last packet
received.
Network Statistics
— network traffic
statistics
Shown here is an example of a print server configured in infrastructure mode. If a Print
Server Configuration Page does not print, see page 19.
*********************** Print Server Configuration ***********************
Mac Address
: 00306E0D699E
FLASH-ROM Version
: 0036
Build Date
: 2001-07-24
BOOT-ROM
Version
: 0101
Build Date
: 2001-01-29
1. TCP/IP settings
IP Address
: 192.168.2.163
Subnet mask
: 255.255.255.0
Default Gateway
: 192.168.2.1
RARP
: Disable
BOOTP
: Disable
DHCP
: Enable
ARP + PING
: Enable
2. AppleTlak Settings
Status
: Enable
Printer
: npi0396D3.LaserJet 1220
Zone
: (deafult zone)
3. SNMP settings
Set Communicty Name
: (not_set)
4. Wireless settings
Connection Mode
: Infrastructure
WEP Request
: 40Bit Enable(Shared Key)
SSID
: iIPS-TM
Fragmentation Thresh.: 2346
RTS Threshold
: 0
Tx Rate
: Auto
Country Code
: 2
5. Current Status
Connection Status
: Connected(Infrastructure)
Link Status
: Excellent
Current Channel
: 3
Current Datarate
: 2 (Mbps)
Parallel Port Mode
: ECP Mode
Printer Manufacturer : Hewlett-Packard
Printer Model
: HP LaserJet 1220
6. Network Statistics
Unicast Packets Rcvd.: 2
Total Packets Rcvd.
: 72
Packets Transmitted
: 19
****************************************************************************
END OF PRINTOUT
