26
Connecting to a Windows NT 4.0 Server
Microsoft Windows for Workgroups v3.11
11 Connecting to a Windows NT 4.0 Server
Microsoft Windows for
Workgroups v3.11
Requirements
Device Configuration
Procedure
1
With the HP Vectra turned off, install the network adapter into an ISA slot.
2
Connect the network cable to the newly installed network adapter.
3
Power on the machine and start in MS-DOS mode.
4
Start Windows for Workgroups.
5
After Windows loads, open the “Network” Program Group and double-
click on “Network Setup”.
6
Click on the “Networks” button in the “Network Setup” dialog box.
7
Select “Install Microsoft Windows Network” option and click “OK”.
8
Click on the “Drivers” button from the “Network Setup” dialog box and
click on “Add Adapter”.
9
Click “OK” to accept the default choice of “Unlisted or Updated Network
Adapter”.
Operating System
Windows for Workgroups 3.11
Driver Version
3.11
Driver File
Elnk3.386
Server OS
Windows NT 4.0 Server
Client OS
Microsoft
Device
Configuration
Configuration 1
Configuration 2
Interrupt
5
11
I/O Address
210-21F
300-30F
3c509b.book Page 26 Thursday, December 9, 1999 3:43 PM
