13
Connecting to a Microsoft Windows NT 4.0 Server
Microsoft Windows NT 4.0 Workstation
6 Connecting to a Microsoft Windows NT 4.0 Server
Microsoft Windows NT
4.0 Workstation
Requirements
Device Configuration
Procedure
1
With the HP Vectra turned off, install the network adapter into an ISA slot.
2
Connect the network cable to the newly installed network adapter.
3
Power on the machine and boot to Windows NT.
4
Log into Windows NT with administrator privileges.
5
The following steps are based on a first-time installation of Networking on
the system. Adding a NIC to a previously installed Networking has some
minor differences. Ask your administrator for more information.
6
Open the “Network Properties” windows and agree to install “Windows
NT Networking”.
7
With “Wired to the Network” checked, click on “Next”.
8
Click on the option to “Select from list…” then on “Have Disk…”.
9
Insert the driver disk and click on “OK”.
Operating System
Windows NT 4.0 Workstation
Driver Version
5.26.45
Driver File
Elnk3nd4.sys
Server OS
Windows NT 4.0 Server
Client OS
Microsoft
Device
Configuration
Configuration 1
Configuration 2
Interrupt
5
11
I/O Address
300-30F
210-21F
3c509b.book Page 13 Thursday, December 9, 1999 3:43 PM
