HP Vectra VL6 8, Installation Manual

Page: 25 / 36

4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 4.0
6 Click on “Start”, up to “Settings”, and open “Control Panel.”
7 Select the “Network” icon in the “Control Panel” program group.
8 Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
9 With “Wired to the Network” checked, click on “Next.”
10 Click on “Select from List”, then click “Have Disk.”
11 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the
disk 4 of 6 , Auto LANStreamer PCI drivers disk.
(If you have an HP preloaded HDD, set path to
“C:Masters\LanDrv\LNSTRM\DISK4\NT\”)
12 Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialog
box, and click “OK”.
13 With “IBM Streamer Family Adapters” listed, click on “Next.”
14 Choose the default Protocol TCP/IP, and any additional Network
Protocols by clicking the check boxes in the “Network Protocols” dialog
box, and click “Next.”
(If you do not have the required information, contact your network
administrator)
15 Click “OK” for the review of network services, and click on “Next.”
16 Click on “Next” to install the selected components.
17 Insert the Windows NT Workstation CD.
18 In the “Windows NT Setup” enter the path to your NT files, and click on the
“Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”)
19 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”
dialog box.
20 Click accordingly if you plan on using DHCP or if you plan on specifying
your IP address manually.
21 Specify your IP information or click on “Obtain an IP address from a DHCP
server” and click “OK.”
22 At the “Show Bindings for” window, click on “Next.”
23 Click on “Next” to start the network.
24 Specify your “Domain/Workgroup Settings”, and click on “Next.”