HP Vectra VL6 8, Installation Manual

Page: 18 / 36

3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version 3.51
9 In the “Windows NT Setup” enter the path to your NT files, and click on
the “Continue” button.
(If you have an HP preloaded HDD, set path to “C:\I386”)
10 Click on the “Do Not Detect” button from the “Network Adapter Card
Detection” dialog box, and click on “Continue” in the second “Network
Adapter Card Detection” dialog box.
11 From the “Drop Down List”, scroll down and select “<Other> Requires
disk from manufacturer”, then click “Continue“.
12 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the
disk 4 of 5, Auto LANStreamer PCI drivers disk.
(If you have an HP preloaded HDD, set path to
“C:\Masters\LanDrvs\LNSTRM\DISK4\NT\”)
13 Click “OK” at the “Install Driver” dialog box.
14 Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialog
box, and click “OK”.
15 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”
dialog box.
16 Choose the default Protocol TCP/IP, and any additional Network
Protocols by clicking the check boxes in the “Windows NT Setup” dialog
box, and click “Continue.”
(If you do not have the required information, contact your network
administrator)
17 Check the boxes to add additional TCP/IP components, and click on the
“Continue” button.
18 Click “OK” for the review of network settings, or “Network Settings”
dialog box.
19 Set your IP address information in the “TCP/IP Configuration” dialog box,
and click “OK”.
(If you do not have the required TCP/IP settings, contact your network
administrator)
20 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept
the default “Workgroup” as your workgroup name.
(If you do not have the required information, contact your network
administrator)
21 To complete the installation, remove the floppy disk, and click on “Restart
Computer” in the “Windows NT Workstation Networking Setup” dialog