3 Connecting to a Windows NT 3.51 Server
Windows NT Workstation Version 4.0
Windows NT
Workstation
Version 4.0
Requirements
•
HP Vectra with Microsoft Windows NT Workstation 4.0 installed.
•
Madge Smart 16/4 PCI Drivers diskettes Ver. 3.04
•
Driver Name: SMARTNT.SYS Size: 121KB Date: 5/11/94
•
Microsoft Windows NT Workstation 3.51 and Service Pack Media.
•
Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
•
I/O Base Address
FC00h
•
Interrupt Request Level
9
Procedure
1
With the HP Vectra turned off install the Madge Smart 16/4 PCI TR
adapter card into a PCI slot.
2
Power on the machine and log into NT workstation with administrator
privileges. (If you do not have the required information, contact your
network administrator)
3
Click on “Start”, up to “Settings”, and open “Control Panel.”
4
Select the “Network” icon in the “Control Panel” program group.
5
Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
6
With “Wired to the Network” checked, click on “Next.”
7
Click on “Select from List”, then click “Have Disk.”
8
Set the path to “A:\” in the “Insert Disk” dialog box, and then insert the
disk 2 of 2. (If you have an HP preloaded HDD, set path to
“C:\LANDRV\MADGE\DISK2\”)
9
Select “Madge Smart 16/4 PCI Ringnode” in the “Select OEM Option”
dialog box, and click “OK”.
10
With “Madge Smart 16/4 PCI Ringnode” listed, click on “Next.”
