3 Connecting to a Windows NT 3.51 Server
Windows NT Workstation Version 3.51
Windows NT
Workstation
Version 3.51
Requirements
•
HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
•
Madge Smart 16/4 PCI and drivers diskettes ver 4.2.
•
Driver Name: SMARTNT.SYS Size: 121KB Date: 5/11/94
•
Microsoft Windows NT Workstation 3.51 and service pack media.
•
Microsoft Windows NT Server 3.51machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
•
I/O Base Address
FC00h
•
Interrupt Request Level
9
Procedure
1
With the HP Vectra turned off install the Madge Smart16/4 PCI TR
adapter card into a PCI slot.
2
Power on the machine and log onto windows NT with administrator
privileges. (If you do not have the required information, contact your
network administrator)
3
Open the “MAIN” program group, and double-click on the “Control Panel”
icon.
4
Select the “Network” icon in the “Control Panel” program group.
5
Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
6
Insert the Windows NT Workstaion CD.
7
In the “Windows NT Setup” enter the path to your NT files, and click on
the “Continue” button. (If you have an HP preloaded HDD, set path to
“C:\I386”)
8
Click on the “Do Not Detect” button from the “Network Adapter Card
Detection” dialog box, and click on “Continue” in the second “Network
Adapter Card Detection” dialog box.
9
From the “Drop Down List”, scroll down and select “<Other> Requires
disk from manufacturer”, then click “Continue“.
