Optical drive
NOTE:
The optical drive spare part kit includes an optical drive bezel.
Description
Spare part number
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
509073-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
509074-001
Optical drive weight saving blank
518183-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery on page 38
).
Remove the optical drive:
1.
Position the computer with the right side toward you.
2.
Slide the optical drive release latch
(1)
toward you. (The optical drive is partially ejected from the
optical drive bay.)
3.
Remove the optical drive
(2)
from the computer.
To install an optical drive, slide the optical drive into the optical drive bay until you hear a click.
Component replacement procedures
43
Summary of Contents for TouchSmart tx2-1000 - Notebook PC
Page 1: ...HP TouchSmart tx2 Notebook PC Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 123: ......
