HP TFT5600 Page 8 User Manual Download

Page: 8 / 63

About This Guide

HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide

HP CONFIDENTIAL

Writer: Amy Laffitte - John Turner File Name: a-frnt

Codename: RUGER Part Number: 229719-003 Last Saved On: 8/12/02 6:42 PM

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack if it is a single-rack installation.

•

The racks are coupled together in multiple-rack installations.

•

Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.

Symbols in Text

These symbols may be found in the text of this guide. They have the following
meanings.

WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.

CAUTION:

Text set off in this manner indicates that failure to follow directions could

result in damage to equipment or loss of information.

IMPORTANT:

Text set off in this manner presents essential information to explain a concept

or complete a task.

NOTE:

Text set off in this manner presents additional information to emphasize or supplement

important points of the main text.

Summary of Contents for TFT5600
































































Search results

Summary of Contents for TFT5600

Reviews:

Related manuals for TFT5600

Brands by name

Popular brands

HP TFT5600, User Manual

Search results

Summary of Contents for TFT5600

Reviews:

Related manuals for TFT5600

Brands by name

Popular brands