HP TFT5600 Page 40 User Manual Download

Page: 40 / 63

Operating the TFT5600 RKM

HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide

3-15

HP CONFIDENTIAL

Writer: Amy Laffitte File Name: d-ch3 Operating

Codename: RUGER Part Number: 229719-003 Last Saved On: 8/11/02 11:01 PM

OSD Size

This option contains a sub-menu:

•

Normal

•

Double

—

(+)

moves up a selection in the OSD Size menu list and activates that

choice.

—

Down

(-) moves down a selection in the OSD Size menu list and activates

that choice.

—

Select

exits the OSD Size menu list leaving the last selection as the new

default.

OSD Size is a Global Setting.

Normal

OSD size is set to normal character size.

Double

OSD size is set to double character size. The OSD position is adjusted if necessary to
remain visible on the screen.

OSD Timeout

This option displays a slider bar at the right side of the OSD display to allow the
adjustment of OSD Timeout. The timeout ranges from 5 to 55 seconds with 5 second
intervals. The default setting is 10 seconds.

•

Up (+)

increases the time the OSD remains displayed.

•

Down (-)

decreases the time the OSD remains displayed.

•

Select

accepts the current value and exits the slider bar.

OSD Timeout is a Mode Setting.

Summary of Contents for TFT5600
































































Search results

Summary of Contents for TFT5600

Reviews:

Related manuals for TFT5600

Brands by name

Popular brands

HP TFT5600, User Manual

Search results

Summary of Contents for TFT5600

Reviews:

Related manuals for TFT5600

Brands by name

Popular brands