manualshive.com logo in svg

HP TACL, Programming Manual, Page: 144 / 235

Share
Download
HP TACL Programming Manual Download Page 144

Monitoring Job Status:  ENQUIRY

Initiating and Communicating With Processes

5–36

107365 Tandem Computers Incorporated

To run this routine, load the associated file and enter:

enquiry 

TACL-process-name

Figure 5-14.  Retrieving TACL Output (Page 1 of 2)

?SECTION enquiry ROUTINE

#FRAME

[#PUSH

  last_line last_char max_chars

  status r_error r_rec prompt

  process_name

  next last record length

]

#SET max_chars 80       == Truncate display at this position

#SET last_line 21

#SET last_char [#COMPUTE [max_chars] - 1]

[#DEF enquiry_message

  STRUCT

    BEGIN

    INT message_code VALUE -22;

    END;

]

[#DEF enquiry_reply

  STRUCT

    BEGIN

    INT   next;

    STRUCT line (0:[last_line]);

      BEGIN

      INT length;

      CHAR text (0:[last_char]);

      END;

    END;

]

== Get the name of the TACL process

SINK [#ARGUMENT /TEXT process_name/ PROCESSNAME]

==

==  Open the TACL process.

#SET status &

  [#REQUESTER/WAIT 5000/READ [process_name] r_error

    r_rec prompt]

==  If unsuccessful process open, display an error and exit.

[#IF [status] <> 0 |THEN|

  #OUTPUT Error opening the process:  [status]

  #UNFRAME

  #RETURN

]

Summary of Contents for TACL












































































































































































































































Reviews:

No comments