Operation
2-2
HP Uninterruptible Power System T700 Models User Guide
HP CONFIDENTIAL
Codename: Sherman7 Part Number: 215420-002 Last Saved On: 10/4/02 10:27 AM
continued
Item Description
Meaning/Function
5
Test/Alarm Reset button
Resets alarms or initiates self-tests.
6
On/Standby button
Places the UPS in Standby mode (turns output load segments
off) or starts UPS powering the load.
Site Wiring Fault Indicator
The UPS T700 NA model features a Site Wiring Fault Indicator (1) located on the rear panel
of the UPS unit. The Site Wiring Fault Indicator illuminates if the ground wire connection
does not exist, or if the line and neutral wires are reversed in the line receptacle. This
indicator remains illuminated until the condition is resolved.
CAUTION:
The UPS operates in this condition, but does not provide proper noise and surge
protection.
For information and procedures to follow if the Site Wiring Fault Indicator is illuminated,
refer to Chapter 5, “Troubleshooting.”
1
Figure 2-2: Site Wiring Fault Indicator
Summary of Contents for T700 Series
Page 6: ......
