background image

Owner's Manual

W

ARRANTY 

REGISTRA

TION:

register online toda

y f

or a chance 

to win a FREE 

Tr

ipp Lite product—

www

.tr

ipplite

.com/w

arr

anty

SmartOnline

3-Phase (50kVA & Above)

Intelligent True On-Line UPS Systems

Input/Output:
3Ø, 4 Wire (plus ground), wye
• SU50K3/3PM & SU80K3/3PM Models: ................277/480V AC
• SU50K3/3INTPM & SU80K3/3INTPM Models:......220/380, 230/400 or 240/415V AC (user-selectable)*

There are two separate UPS system modules: a power module and a 348V DC battery module. The power module is described in
this manual. The 348V DC battery module is described in its owner's manual, printed separately. The model numbers listed in this
manual are for the power module only.

Important Safety Warnings

2

Power Module Features

4

Installation

5

Electrical Connection

6

Single UPS Operation

8

Multiple UPS Operation (Parallel)

11

LCD Display Navigation

16

Communications

20

Service

23

Warranty & Warranty Registration

23

1111 W. 35th Street • Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

Copyright ©2005 Tripp Lite. All rights reserved. SmartOnline™ is a trademark of Tripp Lite.

The policy of Tripp Lite is one of continuous improvement. Specifications and operating procedures are subject to change without notice. This product designed and engineered in the USA.

* See "Parameter Setting" Sub-Menu on page 17 to set the inverter output voltage. ** CE certification applies to SU50K3/3INTPM and SU80K3/3INTPM only

**

Summary of Contents for SmartOnline SU50K3/3INTPM

























Reviews: