manualshive.com logo in svg

HP T5145 - Thin Client - Tower, Administrator'S Manual, Page: 78 / 121

Share
Download
HP T5145 - Thin Client - Tower Administrator'S Manual Download Page 78

Touch Screen

Touch Screen allows you to operate the thin client by touching the display screen.

To enable touch screen:

1.

Click 

Control Panel

 > 

Peripherals

 > 

Touch Screen

 and select 

Enable Touch Screen

.

2.

Select the 

Controller Type

 and 

Device Port

, and elect to 

Swap X

 or 

Swap Y

, if desired.

3.

Click 

Ok

 to save your changes and close the dialog box.

A message appears to inform you that your changes will take effect at the next login.

4.

Click 

Yes

 to log off and restart the desktop with your changes.

If you click 

No

, the current desktop environment will remain unchanged.

5.

Click 

Control Panel

 > 

Peripherals

 > 

Touch Screen

 and click 

Calibrate

 to calibrate the touch

screen.

NOTE:

The touch screen can only be calibrated if it has been enabled and the desktop restarted.

The touch screen will not track correctly on the screen if the display is rotated.

70

Chapter 2   Installation

ENWW

Summary of Contents for T5145 - Thin Client - Tower


























































































































Reviews:

No comments