HP Surestore Disk Array 12h - And FC60, Service Manual, Page: 4 / 746

4
Service Manual Revision History
2FWREHU
'HFHPEHU
Change Page
Added Disk Module Behavior When Moving Disks to describe the disk
module behavior change introduced with firmware release HP03.
270
Added list of supported UPS models. 164
Change Page
Added Figure 87 to clarify operation of the write cache flush thresholds. 267
Added note regarding the impact of LUN binding on performance. 264
Added Allocating Space for Disk Array Logs section describing use of
environment variable AM60_MAX_LOG_SIZE_MB.
340
Added amutil -rr option for setting disk status to REPLACED. 336
Added information on Purging Controller Logs . 344
Added information on correct slot for installing position of a single 256 MB
DIMM on the controller. 673
Added -force option to syswipe command for formatting array with LUNs in
place. 331
Updated firmware download procedures for HP08. 346
Added information for RAID 0 support on HP-UX. 60
Changed the required minimum number of disk modules per enclosure from 2
to 4 based on power supply requirements for the disk enclosure. 85
Added information on disabling disk write cache enable to improve data
integrity. 325