HP Stream PC 14-ax1 Series Maintenance And Service Manual Download Page 63

Page: 63 / 73

Starting HP PC Hardware Diagnostics UEFI

NOTE:

For Windows 10 S computers, see

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

on page 55

To start HP PC Hardware Diagnostics UEFI, follow these steps:

Turn on or restart the computer, and quickly press

esc

Press

The BIOS searches three places for the diagnostic tools, in the following order:

Connected USB flash drive

NOTE:

To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see

Downloading the latest HP PC Hardware Diagnostics UEFI version on page 55

Hard drive

BIOS

When the diagnostic tool opens, select the type of diagnostic test you want to run, and then follow the
on-screen instructions.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in the following situations:

●

HP PC Hardware Diagnostics UEFI is not included in the preinstall image.

●

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.

●

The hard drive is damaged.

NOTE:

The HP PC Hardware Diagnostics UEFI download instructions are provided in English only, and you

must use a Windows computer to download and create the HP UEFI support environment because only .exe
files are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive:

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

In the HP PC Hardware Diagnostics UEFI section, select Download UEFI Diagnostics, and then select
Run.

Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products

only)

NOTE:

For some products, it may be necessary to download the software to a USB flash drive by using the

product name or number.

To download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB
flash drive:

Using HP PC Hardware Diagnostics UEFI

Summary of Contents for Stream PC 14-ax1 Series










































































Search results

Summary of Contents for Stream PC 14-ax1 Series

Reviews:

Related manuals for Stream PC 14-ax1 Series

Brands by name

Popular brands

HP Stream PC 14-ax1 Series, Maintenance And Service Manual

Search results

Summary of Contents for Stream PC 14-ax1 Series

Reviews:

Related manuals for Stream PC 14-ax1 Series

Brands by name

Popular brands